Category Archives: Equipment

DM5E Series Wall Thickness Gage

main-dm5e-thickness-gage

The DM5E series wall thickness gages enables you to accomplish a large number of demanding tasks, especially with remaining wall thickness measurements on components subjected to corrosion and erosion.

The DM5E Series wall thickess gages are smart, simple-to-use ultrasonic thickness gages that offer big ultrasonic performance in a small lightweight package. Compact size and ergonomic shape provide comfortable one-hand use.

USM Go

app-usm-go-weld-inspection

The well-established and proven ultrasonic flaw detector USM Go is available with joystick operation or as the USM Go+ with arrow-key operation. The USM Go and the USM Go+ are both extremely portable and robust ultrasonic flaw detectors. Both units have a small protected hand-held housing with the biggest A-Scan display in its class and features which are essential for inspections based on common codes and standards.

The USM Go is the first choice when top UT performance, combined with ultra-portability and one-hand joystick operation is required and furthermore has the option to upgrade to a thickness gauge.

The USM Go + is the youngest member of the USM Go family equipped with an arrow-keypad and the latest industrial electronics. The state-of-the-art technology contributes to the improved UT performance of the USM Go + .One prime example is the outstanding Near Surface Resolution which allows a reliable detection of defects located just below the surface of the test piece.

Apart from the different operational devices the joystick or the arrow-keypad, the operation and the menus of both instruments are the same. The accessories are inter-changeable with both instruments. And even the stored instrument settings of the USM Go can be used with the USM Go + and vice versa which will ease any ultrasonic inspector’s work but will ensure that proven settings can continue to be used with new equipment and even shared with other USM Go / USM Go+ inspectors.

880 Delta


delta_880_projector_camera

SENTINEL Model 880 Delta is used for industrial application of gamma radiography to inspect materials and 3 structured in the density range of approximately 2.71 g/cm3 through 8.53 g/cm3. It’s also accommodate low energy isotopes to permit radiography of material and structures of thin sections of steel and low density alloys. This model of exposure devices are also designed for use with low activity sources with high photon energies that are used for mass absorption (gamma scanning) studies of high-density materials up to 18.7 g/cm3.

USM-35X


usm-35x

The latest version of the USM 35 portable ultrasonic flaw detector from GE Inspection Technologies, is now totally protected against the ingress of dust and high pressure jets of water to IP 66 and contains new software

VACUUM BOX (Electric Pump Generated)


 vacuum1 vacuum2 vacuum3

The vacuum is generated by the use of an electric vacuum pump and external compressor. The vacuum boxes are rated to either 20 inch Hg (10psi/0,7bar) or 10 inch Hg (5psi/0.37bar) depending on usage.

The vacuum boxes have calibrated pressure relief valves fitted as standard. Also the boxes cannot be damaged by drawing too great a vacuum.

DMS 2

 dms-2

The DMS 2 has retained the user preferred features of its predecessor, the popular DMS, and added expanded measurement capabilities to solve remaining wall thickness applications. All information (large thickness digits, A-Scan, B-Scan, and data files) is clearly displayed on a large high resolution (1/4 VGA) LCD screen that is easily read in direct sunlight. The DMS 2 is compact, easy-to-use, and like all Krautkramer D-Meters is built-to-last in a custom molded, gasket sealed, high-impact resistant housing with a rubber protective case to withstand use in harsh industrial environments.

SCORPION DCP

scorpion-dcp 

The Scorpion DCP is a rugged remote access ultrasonic crawler designed to allow cost effective ultrasound thickness measurements on above ground Ferro-magnetic structures without the need for costly scaffolding or rope access.

OmniScan MX


omniscan-mx

This rugged, portable R/D Tech OmniScan with phased array module offers high speed acquisition rate and powerful software features to efficiently perform manual and automated inspection.

The OmniScan MX with UT module offers Time-of-Flight-Diffraction (TOFD) with conventional detection and A-scan, B-scan and C-scan displays.

FLOORMAP VS2i


floormapfloormapvs2i-a

The FloormapVS2i floor scanner is a computerized MFL system designed to detect, size and map under floor corrosion on above ground storage tanks. The Floormap VS2i magnetic flux leakage (MFL) floor scanner comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The Floormap VS2i contains significant improvements in terms of defect positioning, electronic data processing and software manipulation.

Key Features

  1. Automatic CAD Drawing
  2. Patch Plate Design Feature
  3. Ruggedized Touch Screen Computer
  4. Real Time Data Acquisition and Analysis
  5. Hard Copy and Electronic Report Function
  6. Combined Defect Profiling and Amplitude Analysis
  7. Add Data from Visual, UT, Vacuum Box and MPI Inspection